I am in the midst of a master bedroom makeover and decided I needed a little something to dress up the door. What better than a Ribbon Tassel!
Tassels are a great way to add a bit of style to a doorknob, drawer pull, lamp switch or stair banister. And, with so many wonderful ribbon options from May Arts, you can create a tassel in any design or color theme you desire.
So, look around your home, find the perfect spot for a tassel and follow along as I show you how to create your own unique Ribbon Tassel.
- Wood Finial—you can find a variety of styles at your local hardware store or at a flea market like I did. (I paid $2.00 for mine).
- Spray Paint—in a color to coordinate with your theme. My color theme is black, white and yellow.
- Hot Glue Gun
- Bead (for dowel top)
In order to get your finial ready for your tassel, you need to do two things:
- Drill a small hole into the top of your finial. This hole will be used to secure your ribbon handle.
- Spray paint your finial to work with your color theme. My finial was originally stained brown, so I spray painted it a high gloss black to coordinate with my ribbons.
Next, you can create your hanging loop. To do this, I threaded both ends of a 10” length of ADD10 ribbon through a large silver bead. I knotted the loose ends of the ribbon to keep the bead on.
Now you’ll need to cut your ribbon into various lengths. Having different lengths of ribbon within your tassel will give it more movement and interest.
I cut selected ribbons in 13” lengths, 11” lengths, 9” lengths and 7” lengths.
Once all my ribbon lengths were cut, I began gluing them to the bottom of my finial.
I glued one style of 13” ribbon on first by laying the ribbon face side up in a cross pattern. I glued the finial to the middle of the ribbons.
Next, I glued two pieces of 11” ribbon onto the finial bottom, followed by two pieces of 9” ribbon and lastly, two pieces of 7” ribbon. Continue gluing ribbons onto the finial bottom in various spots so that the lengths vary in position around the based of the finial.
Once all your ribbons are glued in place, glue your handle into the hole drilled at the top of your finial. Push your bead down so that it sits on the finial top.
I added a loop of 1/8” yellow ric-rac (ARR27) around the finial base to give a finishing touch.
And there you have it, a super easy, but very stylish Ribbon Tassel to give your home a little pizzazz!
Blog Post By: Shelly Dozier-Mckee